Administrator Guide

154 | Deploying W-ClearPass Clusters Dell Networking W-ClearPass Deployment Guide
3. To enable the W-ClearPass Insight reporting tool on this node, select the Enable Insight check box.
n When you enable this check box on a cluster node, the W-ClearPass Insight Repository configuration is
automatically updated to point to the server's management IP address.
n When you enable this check box for other servers in the cluster, those servers are added as backups for
the same authentication source.
n The order of the primary and backup servers in the W-ClearPass Insight Repository is the same order in
which W-ClearPass Insight was enabled on those servers.
4. To specify the current cluster node as an Insight Master, click the Enable as Insight Master check box.
Enabling a cluster node as an Insight Master allows other nodes where Insight has been enabled to
subscribe to this node’s Insight Report configuration.
In the event that this node fails, the reports will still be produced because all the nodes in the cluster send a
copy of their NetEvents data to all the nodes that have W-ClearPass Insight enabled.
5. When finished with enabling W-ClearPass Insight and configuring any other elements in the Server
Configuration dialog, click Save.
Configuring Cluster File-Backup Servers
This section contains the following information:
l Adding Cluster File-Backup Servers
l Backing Up Configuration and Access Tracker Log Information
Adding Cluster File-Backup Servers
To add cluster file-backup servers:
W-ClearPass Policy Manager provides the ability to push scheduled data securely to an external server. You can
push the data using the SFTP (SSH File Transfer Protocol)and SCP (Session Control Protocol) protocols.
To configure cluster file-backup servers:
1. Navigate to the Administration > External Servers > File Backup Servers page.
The File Backup Server page opens.
2. Click the Add link (at the top-right).
The Add File Backup Server page opens.