Administrator Guide

Figure 139 Add File Backup Servers Page
Table describes the Add File Backup Server page parameters.
Table 27: Add File Backup Page Server Page Parameters
Parameter Action/Description
Host 1. Enter the name or IP address of the host.
Description
2. Enter the description that provides additional information about the File Backup
server.
Protocol
3. Specify the protocol to be used to upload the generated reports to an external
server. Select from the following protocols:
l SFTP (SSH File Transfer Protocol)
l SCP (Session Control Protocol)
Port 4. Specify the port number. The default port is 22.
Username
5. Enter the user name and password of the host server, then verify the password.
Password
Dell Networking W-ClearPass Deployment Guide Deploying W-ClearPass Clusters | 155