Administrator Guide

164 | Deploying W-ClearPass Clusters Dell Networking W-ClearPass Deployment Guide
cluster reset-database
The cluster reset-database command resets the local database and erases its configuration.
Running this command erases the Policy Manager configuration and resets the database to its default
configuration—all the configured data will be lost.
When running this command, do not close the shell or interrupt the command execution.
Syntax and Example
cluster reset-database
cluster set-cluster-passwd
Use the cluster set-cluster-passwd command to change the cluster password on all nodes in the cluster.
Issue this command from the publisher node.
Syntax
cluster set-cluster-passwd
Example
The following example changes the cluster password on all the nodes in the cluster:
[appadmin]# cluster set-cluster-passwd
cluster set-cluster-passwd
Enter Cluster Passwd: college.162
Re-enter Cluster Passwd: college.162
INFO - Password changed on local (publisher) node
Cluster password changed
cluster sync-cluster-passwd
Use the cluster sync-cluster-passwd command to synchronize the cluster (appadmin) password currently
set on the publisher with all the subscriber nodes in the cluster.
Synchronizing the cluster password changes the appadmin password for all the nodes in the cluster
Syntax and Example
[appadmin]# cluster sync-cluster-passwd
Example
The following example changes the local password:
[appadmin]# cluster set-local-password
cluster sync-local-passwd
Enter Password: college.205
Re-enter Password: college.205