Administrator Guide

170 | Mobility Access Switch Configuration for 802.1X Authentication Dell Networking W-ClearPass Deployment Guide
(host) (802.1X Authentication Profile "FacultyAuth") #reauth-max 2
(host) (802.1X Authentication Profile "FacultyAuth") #reauthentication
Verifying Configurations
To verify the above configurations, execute the following show command:
(host) (config) #show aaa authentication dot1x FacultyAuth
802.1X Authentication Profile "FacultyAuth"
--------------------------------------------
Parameter Value
--------- -----
Max authentication failures 2 <--
Enforce Machine Authentication Disabled
Machine Authentication: Default Machine Role guest
Machine Authentication Cache Timeout 24 hr(s)
Blacklist on Machine Authentication Failure Disabled
Machine Authentication: Default User Role guest
Interval between Identity Requests 30 sec
Quiet Period after Failed Authentication 30 sec
Reauthentication Interval 3600 sec <--
Use Server provided Reauthentication Interval Disabled
Authentication Server Retry Interval 30 sec
Authentication Server Retry Count 2
Framed MTU 1500 bytes <--
Number of times ID-Requests are retried 3
Maximum Number of Reauthentication Attempts 2 <--
Maximum number of times Held State can be bypassed 0
Reauthentication Enabled <--
Termination Enabled <--
Termination EAP-Type eap-peap <--
Termination Inner EAP-Type N/A
Enforce Suite-B 128 bit or more security level Authentication Disabled
Enforce Suite-B 192 bit security level Authentication Disabled
Token Caching Disabled
Token Caching Period 24 hr(s)
CA-Certificate N/A
Server-Certificate N/A
TLS Guest Access Disabled
TLS Guest Role guest
Ignore EAPOL-START after authentication Disabled
Handle EAPOL-Logoff Disabled
Ignore EAP ID during negotiation. Disabled
Check certificate common name against AAA server Enabled
Use the privileged mode in the CLI to configure users in the Mobility Access Switch’s internal database.