Administrator Guide

CP-HW-25K Component Specification
Power consumption (maximum) 750 watts
Power supply Dual hot-swappable (optional)
AC input voltage 100/240 VAC auto-selecting
AC input frequency 50/60 Hz auto-selecting
Environmental Specifications
Operating temperature 10º C to 35º C (50º F to 95º F)
Operating vibration 0.26 G at 5 Hz to 350 Hz for 5 minutes
Operating shock 1 shock pulse of 31 G for up to 2.6 ms
Operating altitude -16 m to 3,048 m (-50 ft to 10,000 ft)
Before Starting the W-ClearPass Installation
Before starting the W-ClearPass installation and configuration procedures for the hardware appliance,
determine the following information for the W-ClearPass server on your network, note the corresponding
values for the parameters listed in Table 5, and keep it for your records:
Table 5: W-ClearPass Server Configuration Reference
Required Information Value for Your Installation
Host name (Policy Manager
server)
Management port IP
address
Management port subnet
mask
Management port gateway
Data port IP address
(optional)
NOTE: Make sure that the Data port IP address is not in the same
subnet as the Management port IP address.
Dell Networking W-ClearPass Deployment Guide About W-ClearPass | 21