Administrator Guide
26 | About W-ClearPass Dell Networking W-ClearPass Deployment Guide
If you wish to assign a unique admin password, use this procedure to change it.
To change the administration password:
1. In W-ClearPass, navigate to Administration > Users and Privileges > Admin Users.
The Admin Users page appears.
Figure 9 Admin Users Page
2. Select the appropriate admin user.
The Edit Admin User dialog appears.
Figure 10 Changing the Administration Password
3. Change the administration password, verify the new password, then click Save.
Powering Off the W-ClearPass Hardware Appliance
This procedure gracefully shuts down the hardware appliance without having to log in.
To power off the W-ClearPass hardware appliance:
1. Connect to the CLI from the serial console using the serial port.
2. Enter the following commands:
n login: poweroff
n password: poweroff
The W-ClearPass hardware appliance shuts down.
You can also power off from the WebUIand the appadmin prompt.