Administrator Guide

Figure 15 Configuring the Networks for VM Deployment
13. Specify the virtual network where W-ClearPass will reside, then click Next.
The Ready to Complete screen opens, which displays all the settings you chose for this OVF file
deployment.
14. Review the settings for accuracy, and make any changes if necessary, then click Finish.
The OVF file is deployed in the selected network.
Adding a Virtual Hard Disk
After the OVF file has been deployed and before you power on, you must add a virtual hard disk to the VM
hardware and make sure that the network adapters are assigned correctly.
1. From the W-ClearPass Policy Manager Appliance, select the Summary tab.
Figure 16 Virtual Appliance Summary Tab
Dell Networking W-ClearPass Deployment Guide About W-ClearPass | 33