Administrator Guide

to assign a unique admin password, use this procedure to change it.
To change the administration password:
1. In W-ClearPass, navigate to Administration > Users and Privileges > Admin Users.
The Admin Users page opens.
Figure 27 Admin Users Page
2. Select the appropriate admin user.
The Edit Admin User dialog opens.
Figure 28 Changing the Administration Password
3. Change the administration password, verify the new password, then click Save.
Powering Off the W-ClearPass Virtual Appliance
This procedure gracefully shuts down the virtual appliance without having to log in.
To power off the W-ClearPass virtual appliance:
1. Connect to the command-line interface by choosing Action > Open Console.
2. Enter the following commands:
n login: poweroff
n password: poweroff
The W-ClearPass virtual appliance shuts down.
Using Microsoft Hyper-V to Install W-ClearPass on a Virtual
Appliance
This section documents the procedures for installing the W-ClearPass Policy Manager virtual appliance on a
host that runs Microsoft's hypvervisor, Hyper-V™, as well as completing important administrative tasks, such as
registering for W-ClearPass software updates and changing the admin password.
This section contains the following information:
Dell Networking W-ClearPass Deployment Guide About W-ClearPass | 41