Administrator Guide

Figure 35 Specifying the Virtual Switch in the Event of an Error
11. From the Connection drop-down, choose the virtual switch that will be used for the Management interface
on the W-ClearPass Policy Manager virtual appliance, then click Next.
The following screen will be displayed to allow you to (optionally) specify the Data interface of the W-
ClearPass Policy Manager virtual appliance.
Figure 36 Specifying the Data Interface (Optional)
12. You can choose to either specify the virtual switch that will be used for the Data interface or bypass this
dialog.
a. To specify the virtual switch that will be used for the Data interface, from the Connection drop-down,
choose the virtual switch that will be used for the Data interface, then click Next.
b. To bypass this configuration option, leave Not connected selected in the Connection drop-down, then
click Next.
The Completing Import Wizard screen opens. This screen provides a summary of the import virtual
appliance configuration that you specified.
13. Review the settings displayed in the Summary page, and if they are correct, click Finish.
This completes the procedure to import the virtual appliance.
Dell Networking W-ClearPass Deployment Guide About W-ClearPass | 47