Administrator Guide
Dell Networking W-ClearPass Deployment Guide
Preparing the Mobility Controller for W-ClearPass PolicyManager Integration
| 65
Chapter 2
Preparing the Mobility Controller for W-ClearPass PolicyManager
Integration
This chapter describes how to prepare the Mobility Controller in order to integrate with W-ClearPass Policy
Manager.
This chapter includes the following information:
l Adding a Mobility Controller to W-ClearPass Policy Manager
l Adding a W-ClearPass/RADIUS Server to the Mobility Controller
l Adding the W-ClearPass/RADIUS Server to a Server Group
l Configuring an AAA Profile for 802.1X Authentication
l Configuring a Virtual AP Profile
l Configuring W-ClearPass as an RFC 3576 (CoA) Server
l Adding an SSID to the Mobility Controller for 802.1X Authentication
Adding a Mobility Controller to W-ClearPass Policy Manager
This section describes how to add a mobility controller to W-ClearPass Policy Manager.
This section contains the following information:
l Defining a New Mobility Controller
l Importing a List of Network Devices
l Generating an Example of Import File XML Format
Defining a New Mobility Controller
The mobility controller is responsible for managing access to the Wireless LAN.
You can use this procedure to add any network device from any vendor that supports RADIUS or TACACS+ to W-
ClearPass Policy Manager.
To define a new mobility controller in W-ClearPass:
1. In W-ClearPass Policy Manager, navigate to Configuration > Network > Devices.
The Network Devices screen opens: