Administrator Guide

72 | Preparing the Mobility Controller for W-ClearPass PolicyManager Integ-
ration
Dell Networking W-ClearPass Deployment Guide
RADIUS Server
Parameter
Action/Description Comments
MAC address
delimiter
14. Optionally, specify a MACaddress delimiter.
Sends the MAC address with the following
delimiters in the authentication and accounting
requests of this server:
l colon: Send MAC address as:
XX:XX:XX:XX:XX:XX
l dash: Send MAC address as: XX-XX-XX-XX-
XX-XX
l none: Send MAC address as: XXXXXXXXXXXX
l oui-nic: Send MAC address as: XXXXXX-
XXXXXX
Default: None
Service-type of
FRAMED-USER
15. Enable this option to send the service-type as
FRAMED-USER instead of LOGIN-USER.
Default: Disabled
Radsec
16. Enable or disable RADIUS over TLS (Secure
RADIUS Service) for this server.
Default: Disabled
Radsec Trusted CA
Name
17. Enter the trusted Certificate Authority (CA)
name to be used to verify this server.
Radsec Server Cert
Name
18. Enter the name of the trusted Radsec server
certificate.
Radsec Client Cert
19. Enter the name of the Radsec client certificate
that the mobility controller should use for
Radsec requests.
called-station-id
20. Specify the MAC address of the mobility
controller. This parameter allows you to send
different values for Called Station ID.
Configure the following parameters for
Called Station ID:
l csid_type: Called station ID type.
Default: macaddr
l include_ssid: Enabling this option includes
the SSID in the Called Station ID along with
csid_type.
Default: Disabled
l csid_delimiter: Enabling this option allows
you to send this delimiter to separate csid_
type and ssid in the Called Station ID.
Default: colon
(Example: 00-1a-1e-00-1a-b8:dotx-ssid)
21. When finished, click Apply.
The message “Configuration
Updated successfully” is displayed.