Administrator Guide
Adding the W-ClearPass/RADIUS Server to a Server Group
Before you can reference the W-ClearPass/RADIUS server in the configuration, you must add the W-
ClearPass/RADIUS server to a server group.
l You can add multiple RADIUS servers in a server group. You can configure the same server in more than
one server group. Note that you must configure a server before you can include it in a server group. Server
names must be unique.
Even if there is only one RADIUS server, you must add it to a RADIUS server group.
l You can create groups of RADIUS servers for specific types of authentication—for example, you can specify
one or more RADIUS servers to be used for 802.1x authentication.
l You can also configure servers of different types in one server group. For example, you can include the
internal database as a backup to a RADIUS server.
To add the W-ClearPass/RADIUS server to a server group:
1. On the mobility controller, select the Configuration tab.
2. In the navigation pane, select SECURITY > Authentication.
The Authentication > Servers screen opens.
3. From the list of server types on the left side of the screen, select Server Group.
The Server Group page opens.
Figure 65 Server Group Page
4. To add a server group, enter the name of the server group in the Add field, then click Add.
The new server group you defined is now included in the Server Group list.
5. To configure the server group, click the name of the new server group.
The configuration screen for the selected server group opens.
Dell Networking W-ClearPass Deployment Guide
Preparing the Mobility Controller for W-ClearPass PolicyManager Integration
| 73