Administrator Guide
Figure 68 W-ClearPass Server Added to the RADIUS Server Group
9. Click Apply, then from the top of the screen, click Save Configuration.
You have now defined the W-ClearPass server as a RADIUS server, and the RADIUS server is a member of a
RADIUS server group. These tasks are required before you can use the W-ClearPass Policy Manager server
as a RADIUS server in the network.
Using the CLI
To use the CLI to add a server to a server group:
(Controller-1)(config) #aaa server-group <name>
auth-server <name>
Configuring an AAA Profile for 802.1X Authentication
The AAA profile configures the authentication for a Wireless LAN. The AAA profile defines the type of
authentication (in this example, 802.1x), the authentication server group, and the default user role for
authenticated users.
Be sure to assign a unique name to each virtual AP, SSID, and AAA profile that you modify.
With the RADIUS server and RADIUS server group configured, you can now configure an AAA profile that will
refer to that server group, which, in turn, refers to a server in that server group.
To configure an AAA profile:
1. On the mobility controller, navigate to Configuration > SECURITY > Authentication > AAA Profiles tab.
The AAA Profiles Summary is displayed.
Dell Networking W-ClearPass Deployment Guide
Preparing the Mobility Controller for W-ClearPass PolicyManager Integration
| 75