Administrator Guide
Figure 71 Virtual AP Profile Configuration Screen
The list of profiles on the left of Figure 71 shows all the settings associated with the selected virtual AP
profile—AAA profile (which contains the RADIUS information), 802.11K, and SSID settings.
4. Configure the profile parameters described in Table 13.
The virtual AP profile is divided into two tabs:
n Basic: Displays only those configuration settings that often need to be adjusted to suit a specific
network.
n Advanced: Shows all configuration settings, including settings that do not need frequent adjustment
or should be kept at their default values.
For details on the advanced virtual AP profile parameters, refer to the ArubaOS User Guide > Virtual APs
chapter > Table: "Virtual AP Profile Parameters."
If you change a setting on one tab, then click and display the other tab without saving your changed configuration,
that changed setting reverts to its previous value.
Table 13: Basic Virtual AP Profile Parameters
VAP Parameter Action/Description
General
Virtual AP enable
1. Select the Virtual AP enable check box to enable or disable the virtual AP.
This feature is enabled by default.
VLAN 2. Specify the VLAN(s) into which users are placed in order to obtain an IP address.
Dell Networking W-ClearPass Deployment Guide
Preparing the Mobility Controller for W-ClearPass PolicyManager Integration
| 81