Administrator Guide

88 | Preparing the Mobility Controller for W-ClearPass PolicyManager Integ-
ration
Dell Networking W-ClearPass Deployment Guide
Figure 77 Specifying Radio Type and VLAN ID
8. Enter the values to specify the radio type and VLAN, then click Next.
a. Radio Type: This allows you to specify which radio frequencies the SSID will broadcast on.
The a+n radio type is selected in this example because this radio type specifies the 5 GHz spectrum,
which has more bandwidth than the 2.4 GHz spectrum.
b. Broadcast SSID: Indicate by Yes or No whether you want to broadcast this SSID.
c. VLAN: Choose the VLAN that the user will be assigned to after a successful authentication.
VLAN IDs are suggested from the drop-down list of currently configured VLANs. You can select multiple
VLANs by separating them with commas.
The Specify Usage Scenario configuration screen opens.
Figure 78 Specifying the WLAN Usage Scenario
This screen specifies whether this Wireless LAN is for guest usage (and therefore, captive portal
authentication), or for Internal usage (802.1X authentication).
9. Specify Internal (the default setting), then click Next.
The Specify Authentication and Encryption configuration screen appears.