Administrator Guide

90 | Preparing the Mobility Controller for W-ClearPass PolicyManager Integ-
ration
Dell Networking W-ClearPass Deployment Guide
a. Choose Select from known servers.
b. Scroll to select the W-ClearPass/RADIUS authentication server, then click OK.
The selected server is added to the ordered list of authentication servers.
c. Click Next.
The Configure Role Assignment screen opens (skip to Figure 82).
12. To specify a new W-ClearPass/RADIUS authentication server, click Add.
a. Choose Specify new server.
The following dialog is displayed:
Figure 81 Specifying a New Authentication Server
b. Populate the Authentication Server parameters as described in Table 14.
Table 14: New SSID Authentication Server Parameters
Parameter Action/Description
Server type 1. Choose the default server type: RADIUS.
Name 2. Enter the name of the W-ClearPass Policy Manager server.
IP address 3. Enter the IP address of the W-ClearPass Policy Manager server.
Auth port
4. Specify the authentication port on the RADIUS/Policy Manager server.
l Range: 1 to 65535
l Default: 1812