Administrator Guide

If you provide just one IP address, the WMI login is performed for that particular IP address only.
To configure WMI credentials for a network discovery scan:
1. Navigate to Configuration > Profile Settings.
The Profile Settings page opens.
Figure 107: Profile Settings Page
2. Select the WMI Configuration tab.
Figure 108: WMI Configuration Tab
3. Click Add Configuration.
The WMI Configuration page opens.
Figure 109: WMI Configuration Page
4. Specify the WMI Configuration parameters as described in Table 60, then click Save Entry.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Monitoring | 145