Administrator Guide

156 | Monitoring Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
The following table describes the Event Viewer parameters:
Parameter Description
Source Displays the source of the event. For example, AdminUI or W-ClearPass Updater.
Level Displays the level of the event from the following options:
l INFO
l WARN
l ERROR
Category Displays the category of the event. For example, Logged in, System, or AV/AS Updates.
Action Displays the status of the event action. For example, Success, Failed, Unknown, and None.
Timestamp Displays the date and time when the event occurred.
Table 64: Event Viewer Page Parameters
Creating an Event Viewer Report Using Default Values
1. In the Filter field, select Source as the filter parameter.
2. Click Go.
W-ClearPass returns all event records.
Creating an Event Viewer Report Using Custom Values
1. Click the icon.
A new filter is added. You can add up to four filters.
2. Click Select ANY match.
3. In the first Filter field, select Level.
4. Leave the search term set to contains.
5. Enter ERROR in the text field.
6. In the second Filter field, select Source.
7. Change the search field to equals.
8. Enter SYSMON in the text field.
9. Change the Show records value to 20.
10.Click Go.
The following figure displays the Event Viewer report with custom values: