Administrator Guide

276 | Posture Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 235: Services Page
The following table describes the Services parameters:
Parameter Description
Auto
Remediation
Enable to allow auto remediation for service checks (Automatically stop or start services based on
the entries in Service to run and Services to stop configuration).
User
Notification
Enable to allow user notifications for service check policy violations.
Available
Services
This scrolling list contains a list of services that you can select and move to the Services to run or
Services to stop panels (using their associated widgets). This list varies depending on OS types.
Click the >> or << to add or remove, respectively, the services from the Service to run or Services
to stop boxes.
Insert To add a service to the list of available services, enter its name in the text box adjacent to this
button, then click Insert.
Delete To remove a service from the list of available services, select it and click Delete.
Table 137: Services Page
Processes
The Processes page provides a set of parameters to specify which processes to be explicitly present or absent
on the system.
To configure Processes:
1. From the W-ClearPass Windows Universal System Health Validator page, enable checks for the selected
version of Windows.
2. Select Processes.
3. Enable the Network Connection Check is on check box.
The Processes configuration page appears.