Administrator Guide

30 | About W-ClearPass Policy Manager Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Introduction
This section provides pointers to information on how to configure the primary configuration tasks in
W-ClearPass Policy Manager.
You can access all these configuration tasks via the W-ClearPass Configuration menu.
To access the W-ClearPass Configuration menu, select Configuration.
The Configuration menu appears (see Figure 1):
Figure 1: ClearPass Policy Manager Configuration Menu
Start Here
The W-ClearPass Policy Manager Start Here page provides the ability to create templates for services that will
allows you to define baseline policies and require specific data when you create services.
For more information, see Creating Service Templates on page 36.
Services
The Services page provides options to add, modify, and remove a service. For more information, refer to the
following sections:
l Services Architecture and Flow on page 35
l Policy Manager Service Types on page 70
This page also shows the current list and order of services that W-ClearPass Policy Manager keeps track of
during authentication and authorization.
Authentication and Authorization
The Authentication page provides options to configure the following components:
l Authentication Method
l Authentication Source
l Authorization Source
For more information, refer to the following sections: