Administrator Guide

352 | Configuring Enforcement Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Role Configuration Tab
The fields on the Role Configuration tab require you to select a link to launch a new page where you set role
configuration attributes. For example, adding a Captive Portal profile. The following figure displays the Aruba
Downloadable Role Enforcement Role Configuration tab:
Figure 340: Aruba Downloadable Role Enforcement Role - Configuration Tab
The following table describes the Role Configuration - Attributes parameters:
Parameters Configuration
Captive Portal
Profile
Select the captive portal profile from the drop-down list if already configured. Click Add
Captive Portal Profile link to add a new captive portal profile. For more information,
seeCaptive Portal Profile on page 353.
Policer Profile Select the policer profile from the drop-down list if already configured. Click Add Policer
Profile link to add a new policer profile. For more information, see Policer Profile on page
354.
QoS Profile Select the QoS profile from the drop-down list if already configured. Click Add QoS Profile
link to add a new QoS profile. For more information, see QOs Profile on page 355.
VoIP Profile Select the VoIP profile from the drop-down list if already configured. Click Add VoIP Profile
link to add a new VoIP profile. For more information, see VoIP Profile on page 356.
Reauthentication
Interval Time (0-
4096)
Enter the number of minutes between reauthentication intervals. You can select the range
between 0 to 4096 minutes.
VLAN To Be
Assigned (1-
4904)
Enter a number between 1 and 4094 that defines when the VLAN is to be assigned.
NetService
Configuration
Select the Manage NetServices link to add, edit, and delete the NetService definitions.
NetDestination
Configuration
Select the Manage NetDestinations link to add, edit, and delete the NetDestinations
definitions.
Table 182: Role Configuration - Attributes Page Parameters