Administrator Guide

Profile Tab
Use the Profile tab to configure the template, type of the profile, and device group list. The following figure
displays the CLI Based Enforcement - Profile tab:
Figure 365: CLI Based Enforcement - Profile Tab
The following table describes the CLI Based Enforcement - Profile tab parameters:
Parameter Description
Template Select the template from the drop-down list. In this context, select CLI Based Enforcement.
Name Enter the name of the profile. The name is displayed in the Name column on the Configuration
> Enforcement > Profiles page.
Description Enter a description that provides additional information about the profile. This description is
displayed in the Description column on the Configuration > Enforcement > Profiles page.
Type This field is populated automatically.
Action Click Accept, Reject, or Drop to define the action taken on the request.
Device Group
List
Select a device group from the drop-down list. The list displays all configured device groups. All
configured device groups are listed in the Device Groups ( Configuration > Network >
Device Groups) page.
After adding one or more device group(s), you can select a group and take one of the following
actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
Click this link to add a new device group, For more information, see Adding and Modifying
Device Groups on page 438.
Table 191: CLI Based Enforcement - Profile Tab Parameters
Attributes Tab
Use the Attribute tab to configure the attribute type, name, and value for the enforcement profile. The
following figure displays the CLI Based Enforcement - Attributes tab:
Figure 366: CLI Based Enforcement - Attributes Tab
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Configuring Enforcement | 369