Administrator Guide

382 | Configuring Enforcement Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
The Enforcement Profiles page opens.
2. Click Add.
The Add Enforcement Profiles > Profile tab opens.
3. From the Template drop-down, select Session Restrictions Enforcement.
The Add Session Restrictions Enforcement > Profile dialog opens:
Figure 382: Add Session Restrictions Enforcement > Profile Tab
4. Specify the Session Restrictions Enforcement > Profile parameters as described in the following table:
Parameter Action/Description
Template Select Session Restrictions Enforcement from the drop-down list.
Name Enter the name of the enforcement profile.
Description Optionally, enter a description of the enforcement profile (recommended).
Type Post_Authentication.
The Type field is populated automatically when you select the Session Restrictions
Enforcement template.
Action By default, this field is disabled. It is enabled only when RADIUS type is selected.
Device Group
List
Select a device group from the drop-down list. The list displays all configured device groups.
All configured device groups are listed in the Configuration > Network > Device Groups
page. After you add one or more device groups, select a group and take one of the following
actions:
l To delete the selected device group list entry, click Remove.
l To see the device group parameters, click View Details.
l To change the parameters of the selected device group, click Modify.
Add New
Device Group
To add a new a device group, click the Add New Device Group link. For more information, see
Adding and Modifying Device Groups on page 438.
Table 205: Session Restrictions Enforcement Profile Parameters