Administrator Guide

2. Click the SNMP Configuration tab.
Figure 431: Profile SNMP Configuration Page
3. Click Add SNMP Configuration.
The SNMP Configuration dialog appears.
Figure 432: Configuring SNMP Community Strings
4. Enter the following information in the SNMP Configuration dialog:
a. IP Subnets/IP Addresses: Enter one or more IP subnet addresses and their subnet masks.
For multiple entries, separate multiple IP addresses with commas.
b. SNMP Version: From the drop-down, select the appropriate SNMP version.
c. Description: Optionally, enter a description of this SNMP configuration.
d. Community String: Enter the community string, then reenter the communty string in the Verify field.
5. When finished, click Save Entry, then click Save.
Information Regarding SSH and WMI Configuration
For information on configuring SSH and WMI crendentials:
l SSH credentials
For Linux server or network device discovery, specify SSH configuration credentials. For more information,
see SSH Credentials Configuration on page 142.
l WMI credentials
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide W-ClearPass Policy Manager Profile | 427