Administrator Guide

430 | Network Access Devices Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
l Configure DHCP Relay configuration on the network device to ensure that DHCP requests are forwarded
from the clients. For more information, see DHCP Collector on page 421.
Adding and Modifying Network Devices
A Network Access Device (NAD) must belong to the global list of devices in the W-Policy Manager database in
order to connect to W-Policy Manager using any of the supported protocols.
The W-Policy Manager Network Devices page displays the device name, IP address or subnet address, and a
brief description of each configured device.
To view this page, navigate to Configuration > Network > Devices.
The Network Devices page opens:
Figure 433: Network Devices Page
This page includes the following additional tasks:
l Adding a Network Device on page 430
l Additional Tasks on page 437
Adding a Network Device
This section describes the following tabs used to configure a new network device:
l Device Parameters
l SNMP Read Settings Parameters
l SNMP Write Settings Parameters
l CLIParameters
l Enabling W-ClearPass OnConnect Enforcement on a Network Device
To add a network device:
1. Navigate to the Configuration > Network > Devices page.
The Network Devices page opens.
2. Click the Add link at the top-right corner.
The Add Device page opens.