Administrator Guide

432 | Network Access Devices Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
NOTE: RADIUS:IETF, the dictionary containing the standard set of RADIUS attributes,
is always loaded. When you specify a vendor here, the RADIUS dictionary associated
with this vendor is automatically enabled.
Enable RADIUS CoA To set the UDP port on the device to send CoA (Change of Authorization) actions,
enable RADIUS CoA (RFC 3576/5176) for this device.
RADIUS CoA Port: The default value is 3799.
Attributes To add custom attributes for this device, click Click to add....
By default, four custom attributes appear in the Attribute drop down: Location, OS-
Version, Device-Type, and Device-Vendor.
You can enter any name in the Attribute field. All attributes are of string datatype.
The Value field can be populated with any string. Each time you enter a new custom
attribute, it's available for selection in the Attribute drop-down for all devices.
NOTE: All attributes entered for a device are available in the role-mapping Rules
Editor under the Device namespace.
Table 243: Add Device > Device Parameters (Continued)
SNMP Read Settings Parameters
Use the SNMPRead Settings tab to define values that allow W-ClearPass Policy Manager to read information
from the device using SNMPv1, SNMPv2, or SNMPv3.
Large or geographically-spread cluster deployments typically do not require each W-ClearPass node to probe all
SNMP configured devices. By default, a W-ClearPass node in a cluster only reads network device information for
devices configured to send traps to that node.
1. From the Add Device page, select the SNMP Read Settings tab.
The SNMP Read Settings dialog opens:
Figure 435: Add Device > SNMP Read Settings Dialog
2. Enter the SNMP Read Settings parameters as described in Table 244: