Administrator Guide

50 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
l Creates an enforcement policy for AD-based attributes
l Creates a NAD
Posture checks are not performed if the High Capacity Guest mode is enabled in the cluster.
You can view only the default user role in the Dell User Roles for different access privileges tab if the HCG mode
is enabled in the cluster.
The following figure displays the Dell VPNAccess with Posture Checks service template:
Figure 17: Dell VPNaccess with Posture checks Service Template
The following table describes the Dell VPNAccess with Posture Checks service template parameters:
Parameter Description
General
Select Prefix Select a prefix from the existing list of prefixes. This populates the pre-configured information
in the Authentication Dell Wireless Controller for VPNSettings and Dell User Roles for
different access privileges sections. The Name Prefix field is not editable.
Name Prefix Enter a prefix that you want to append to services using this template. Use this to identify
services that use templates.
Authentication
Select
Authentication
Source
Select an authentication source from the list. The information provided in the Authentication,
Dell Wireless Controller for VPNSettings, and Dell User Roles for different access
privileges sections are auto-populated.
Active Directory
Name
Enter the Active Directory name.
Description Enter a description that helps you to identify the characteristics of this template.
Server Enter the hostname or the IP address of the Active Directory server.
Identity Enter the Distinguished Name of the administrator account.
NETBIOS Enter the server Active Directory domain name.
Base DN Enter the DN of the node in your directory tree from which to start searching for records.
Table 7: Dell VPNAccess with Posture Checks Service Template Parameters