Administrator Guide

Figure 553: Adding an Endpoint Context Server
3. In the Add Endpoint Context Server dialog, specify the parameters as described in Table 309.
4. Click Save.
Table 309 describes the Add Endpoint Context Servers parameters:
Parameter Description
Select Server Type 1. Choose one of the Server Types (endpoint context server vendors) from the following
options.
The Server Type you select determines the configuration parameters.
n AirWatch
n Aruba Activate
n AirWave
n Google Admin Console
n Generic HTTP
n JAMF
n Juniper SRX
n MaaS360
n MobileIron
n Palo Alto Networks Firewall
n Palo Alto Networks Panorama
n SAP Afaria
n SOTI
n XenMobile
NOTE: You can add more than one endpoint context server of the same type.
Server Name 2. Enter the name of the server or host.
Server Base URL 3. Enter the full URL for the server.
The default is the name you entered above with "https://" prepended. You can append a
custom port, such as for an MDM server:
https://yourserver.yourcompany.com:customerportnumber.
Table 309: Add Endpoint Context Server Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 557