Administrator Guide

574 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Adding an Aruba Activate Endpoint Context Server
For more information about Activate, refer to Aruba Activate documentation.
Server Tab
The following figure displays the Aruba Activate Add Endpoint Context Server > Server tab:
Figure 569: Adding an Aruba Activate Endpoint Context Server
The following table describes the Aruba Activate Add Endpoint Context Server > Server parameters:
Parameter Action/Description
Select Server Type 1. Choose Aruba Activate from the Select Server Type drop-down list.
Server Name 2. Enter a valid server name. You can enter an IP address or a hostname.
Server Base URL 3. Enter the complete URL for the Aruba Activate server.
You can append a custom port, such as for an MDM server:
https://yourserver.yourcompany.com:customerportnumber
Username 4. Enter the username for the Aruba Activate server.
Password 5. Enter the password, then verify the password.
Verify Password
Device Filter The Device Filter field is populated with a default regular expression to retrieve only the
Remote AP (RAP) and Instant AP (IAP) information.
Folder Filter The Folder Filter field is set to "*" by default.
Table 321: Adding an Aruba Activate Endpoint Context Server > Server Parameters