Administrator Guide

580 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Validate Server 6. Enable Validate Server to validate the server certificate.
Checking this option enables the Certificate tab.
Bypass Proxy 7. Enable Bypass Proxy to bypass the proxy server.
8. Click Save to save your changes.
Table 324: Add Endpoint Context Server - Server (Generic HTTP) Tab Parameters (Continued)
Integrating W-ClearPass with Infoblox
This section provides the following information:
l Adding an Infoblox Endpoint Context Server
l Adding a Context Server Action to the Infoblox Server
l Creating an Infoblox Enforcement Profile
l Configuring an Infoblox RADIUS Enforcement Profile
l Creating an Infoblox Enforcement Policy
l Defining an Infoblox Service
l Authenticating External Devices Against the Infoblox Service
l Creating a Filter to Accept Information from the W-ClearPass Server
Infoblox is a server that provides a host of services, such as DNS, DHCP, and IPAM (IPaddress management).
Infoblox provides a DHCP management system that issues IP addresses to externally authenticated devices
and also maintains a MAC address context associated with the newly allocated IP address.
Integrating W-ClearPass with Infoblox typically tags the username context, as well as the external device being
authenticated, along with its respective MAC address, which further simplifies IP address management on the
Infoblox side.
This section describes the configurations that you must make on the W-ClearPass server in order for the
W-ClearPass server to send data to an Infoblox server.
Adding an Infoblox Endpoint Context Server
To add an Infloblox endpoint context server:
1. Navigate to Administration > External Servers > Endpoint Context Servers.
The Endpoint Context Servers page opens.
Figure 575: Endpoint Context Servers Page
2. Click Add.