Administrator Guide

The following figure displays the EDUROAM service template:
Figure 23: EDUROAM Service Template
The following table describes the parameters used in the EDUROAM service template:
Parameter Description
General
Select Prefix Select a prefix from the existing list of prefixes. This populates the pre-configured
information in the Authentication, Service Rule, Wireless, andFederation Level Radius
Server (FLR) tabs. The Name Prefix field is not editable.
Name Prefix Enter a prefix that you want to append to services using this template. Use this to identify
services that use templates.
Service Rule
Enter domain
details
Enter the domain name of the network. For example, @edunet.ucla.com. This field is
mandatory.
Select Vendor Select the vendor of the network device. This field is mandatory.
Authentication
Select Active
Directory
Select an authentication source from the list, the information updated in the Authentication,
Wireless, and Federation Level Radius Server (FLR) tabs are auto-populated.
Active Directory
Name
Enter the hostname or the IP address of the Active Directory server. This field is mandatory.
Description Enter a description that helps you identify the characteristics of this template. This field is
mandatory.
Server Enter the hostname or the IP address of the Active Directory server. This field is mandatory.
Identity Enter the DN of the administrator account. This field is mandatory.
NETBIOS Enter the server Active Directory domain name. This field is mandatory.
Base DN Enter the DN of the administrator account. This field is mandatory.
Password Enter the account password. This field is mandatory.
Table 13: EDUROAM Service Template Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 59