Administrator Guide

Figure 597: New IPv4 Network Created
Creating a Filter to Accept Information from the W-ClearPass Server
To create a filter to accept information from the W-ClearPass server:
1. From the Data Management > DHCP tab, select the newly created network.
The Networks page opens.
2. Select the IPv4 Filters tab.
3. To add a filter, click the Plus sign.
The Add IPv4 MAC Address Filter dialog opens.
4. In the Name field, enter W-ClearPass.
Note. the name of the filter must correspond to the filter value in the Endpoint Context Server Content page
(see Attributes Sent to the Infoblox Server on page 582).
5. Optionally, enter a comment to describe this filter, then click Next.
Step 2 of the Add IPv4 MACAddress Filter wizard appears.
6. In the Lease Time fields, enter 21600 Seconds, then click Next.
Figure 598: Specifying Lease Time in the IPv4 MAC Address Filter
The Lease Time value entered here must correspond to the Session-Timeout value defined under Infoblox RADIUS
Enforcement Profile (see Session-Timeout on page 585).
Step 3 of the IPv4 MAC Address Filter wizard appears.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 593