Administrator Guide

Adding a Palo Alto Networks Panorama Endpoint Context Server
Consult the endpoint manufacturer's documentation for information about the parameters that you must
enter to configure this endpoint. The following figure displays the Add Endpoint Context Server - Server
(Palo Alto Networks Panorama) tab:
Figure 621: Add Endpoint Context Server - Server (Palo Alto Networks Panorama) Tab
You can add more than one endpoint context server of the same type. For example, you can add more than one
AirWatch endpoint context server.
The following table describes the Add Endpoint Context Server - Server (Palo Alto Networks Panorama) tab
parameters:
Parameter Description
Select Server Type Choose Palo Alto Networks Panorama from the drop-down list.
Server Name Enter a valid server name. You can enter an IP address or hostname.
Server Base URL Enter the server base URL in the following format: https://{server_ip}
/api/?type=keygen&user={username}&password={password}
Username Enter the username.
Password Enter and verify the password.
Verify Password
Username Transformation Choose one of the following options:
l None - Do not use any username transformation.
Table 333: Add Endpoint Context Server - Server (Palo Alto Networks Panorama) Tab Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 613