Administrator Guide

62 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Guest Access
This template is designed for authenticating guest users who log in using captive portal. Guests must re-
authenticate after session expiry. Guest access can be restricted based on day of the week, bandwidth limit,
and number of unique devices used by the guest user.
The following figure displays the Guest Access service template:
Figure 25: Guest Access Service Template
The following table describes the parameters used in the Guest Access service template:
Parameter Description
General
Select Prefix Select any one prefix from the existing list of prefixes. This populates the pre-configured
information in the Wireless Network Settings and Guest Access Restrictions sections. The
Name Prefix field is not editable.
Name Prefix Enter a prefix that you want to append to services using this template. Use this to identify
services that use templates.
Wireless Network Settings
Wireless SSID
for Guest
access
Enter the SSIDvalue here.
Select wireless
controller
Select the wireless controller from the drop-down list if you already configured.
Wireless
controller
name
Enter the name of the wireless controller.
Controller
IPAddress
Enter the wireless controller's IP address.
Vendor Name Select the manufacturer of the wireless controller.
RADIUS Shared
Secret
Enter the shared secret that is configured on the controller and inside W-Policy Manager to send
and receive RADIUS requests.
Enable
RADIUSCoA
Select to enable RADIUS initiated CoA on the network device.
Table 15: Guest Access Service Template Parameters