Administrator Guide

1. Navigate to Configuration > Services.
The Services page opens. The Services page provides options to add, modify, and remove a service.
2. To add the event-based enforcement service, click Add.
The Add Services dialog opens.
3. From the Type drop-down list, select Event-based Enforcement (see Figure 683).
Figure 683: Specifying Event -Based Enforcement
For configuration information for each of the available service types, see Policy Manager Service Types on
page 70.
4. Enter the name or label of the event-based enforcement service.
5. Enter the values for any other parameters, including service rules, required for this service.
For a description of all the parameters in the Service page, see Adding Services on page 1.
6. Click Next.
The Add Services > Enforcement tab opens.
Associating the Enforcement Service with an Enforcement Policy
After you create the event-based enforcement service, you must associate the service with an enforcement
policy.
To associate an event-based enforcement server with an enforcement policy:
1. When finished with the parameter settings on the Add Services > Service page, click Next.
The Add Services > Enforcement page opens.
Figure 684: Specifying the Event-Based Enforcement Policy
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Configuring Processing for Ingress Events | 681