Administrator Guide

770 | Command Line Interface Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Flag/Parameter Description
-l Lists the boot images installed on the system.
-a <version> Sets the active boot image version in A.B.C.D syntax. This field is optional.
Table 416: Boot-Image Command Parameters
Example
The following example sets the system boot image control options:
[appadmin]# system boot-image -l
system cleanup
Use the system cleanup command to perform a system cleanup operation that purges the following records:
l System and application log files
l Past authentication records
l Audit records
l Expired guest accounts
l Past auto and manual backups
l Stored reports
Syntax
system cleanup <num_days>
The following table describes the required parameter for the system cleanup command:
Flag/Parameter Description
<num_days> This is the cleanup interval that specifies the number of days to retain the data. This
field is mandatory.
Table 417: System Cleanup Command Parameter
Example
The following example performs a system cleanup operation that retains records for four days:
[appadmin]# system cleanup 4
********************************************************
* *
* WARNING: This command will perform system cleanup *
* operation that will result in purging of: *
* [*] system and application log files *
* [*] past authentication records *
* [*] audit records *
* [*] expired guest accounts *
* [*] past auto and manual backups *
* [*] stored reports etc... *
* *
********************************************************
Are you sure you want to continue? [y|n]: y
INFO - Starting system cleanup