Administrator Guide

SNMPEvents
Critical Events
“SNMPService”, “ERROR”, “ReadDeviceInfo”, “SNMP GET failed for device <X> with error=No response
received\nReading sysObjectId failed for device=<X>\nReading switch initialization info failed for <X>”
"SNMPService","ERROR", "Error fetching table snmpTargetAddr. Request timed out. Error reading SNMP target
table for NAD=10.1.1.1 Maybe SNMP target address table is not supported by device? Allow NAD update.
SNMP GET failed for device 10.1.1.1 with error=No response received Reading sysObjectId failed for
device=10.1.1.1 Reading switch initialization info failed for 10.1.1.1”
Info Events
“SNMPService”, “INFO”, “Device information not read for <Ip Address> since no traps are configured to this
node”
Support Shell Events
Info Events
“Support Shell” , “INFO”, “User:customersupport”
System Auxiliary Service Events
Info Events
“System auxiliary service”, “INFO”, “Performed action start on System auxiliary service”
System Monitor Events
Critical Events
“Sysmon”, “ERROR”, “System”, “System is running with low memory. Available memory = <X>%”
“Sysmon”, “ERROR”, “System”, “System is running with low disk space. Available disk space = <X>%”
“System TimeCheck”, “WARN”, “Restart Services”, “Restarting CPPM services as the system detected time drift.
Current system time= <X>, System time 5 mins back = <Y>”
Info Events
“<Service Name>”, “INFO”, “restart”, “Performed action restart on <Service Name>”
“SYSTEM”, “INFO”, “<X> restarted”, “System monitor restarted <X>, as it seemed to have stopped abruptly”
"SYSTEM", "ERROR", "Updating CRLs failed", "Could not retrieve CRL from <URL>."
“System monitor service”, “INFO”, “Performed action start on System monitor service”
"Shutdown” “INFO” system "System is shutting down" Success
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
SNMP Private MIB, SNMP Traps, System Events, Error
Codes | 801