Administrator Guide

Table Of Contents
804 | SNMP Private MIB, SNMP Traps, System Events,
Error Codes
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Code Description Type
6101 Not enough inputs to perform authentication TACACS Authentication
6102 Authentication privilege level mismatch TACACS Authentication
6103 No enforcement profiles matched to perform authentication TACACS Authentication
6201 Authorization failed as session is not authenticated TACACS Authorization
6202 Authorization privilege level mismatch TACACS Authorization
6203 Command not allowed TACACS Authorization
6204 No enforcement profiles matched to perform command authorization TACACS Authorization
6301 New password entered does not match TACACS Change Password
6302 Empty password TACACS Change Password
6303 Change password allowed only for local users TACACS Change Password
6304 Internal error in performing change password TACACS Change Password
9001 Wrong shared secret RADIUS Protocol
9002 Request timed out RADIUS Protocol
9003 Phase 2 PAC failure RADIUS Protocol
9004 Client rejected after PAC provisioning RADIUS Protocol
9005 Client does not support posture request RADIUS Protocol
9006 Received error TLVfrom client RADIUS Protocol
9007 Received failure TLV from client RADIUS Protocol
9008 Phase 2 PACnot found RADIUS Protocol
9009 Unknown Phase 2 PAC RADIUS Protocol
9010 Invalid Phase 2 PAC RADIUS Protocol
9011 PAC verification failed RADIUS Protocol
9012 PAC binding failed RADIUS Protocol
9013 Session resumption failed RADIUS Protocol
9014 Cached session data error RADIUS Protocol
Table 434: W-ClearPass Policy Manager Error Codes (Continued)