Administrator Guide

1. Specify the Roles parameters as described in the following table:
Parameter Action/Description
Role Mapping Policy Select a role mapping policy from the drop-down list.
W-Policy Manager ships a number of preconfigured roles.
NOTE: A service can be configured without a role-mapping policy, but only one
role-mapping policy can be configured for each service.
Role Mapping Policy Details
Description Provide additional information about the selected role-mapping policy.
Default Role Specify the role to which W-Policy Manager defaults when the role-mapping
policy does not produce a match.
Rules Evaluation Algorithm Shows the first matched rule and returns the role or Select all matched rules
and returns a set of roles.
Table 33: Dell 802.1X Wireless Service > Roles Tab Parameters
For information on configuring role-mapping policies, see Configuring a Role and Role Mapping Policy on page
257.
Posture Tab
The Posture tab is not enabled by default.
1. To enable posture checking for this service, select the Posture Compliance check box from the More
Options field on the Service tab.
You can enable the posture checking for this kind of service, if you deploy any of the following:
n W-Policy Manager in a Microsoft Network Access Protection (NAP)
n Cisco Network Admission Control (NAC) Framework environment
n Dell hosted captive portal that performs posture checks through a dissolvable agent
You cannot view the Posture tab if you enable the High Capacity Guest mode in the cluster.
The following figure displays the Posture dialog:
Figure 50: Dell 802.1X Wireless Service > Posture Dialog
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 89