Connectivity Guide

l Auto-send guest receipts by SMS with a special field set – If the Auto-Send Field is set to a non-empty string or a
non-zero value, an SMS receipt will be generated and sent to the visitor’s phone number. The auto-send field can
be used to create an “opt-in” facility for guests. Use a check box for the auto_send_sms field and add it to the
create_user form, or a guest self-registration instance, and SMS messages will be sent to the specified phone
number only if the check box has been selected.
l Display a link enabling a guest receipt via SMS – A link is displayed on the receipt page; if the visitor clicks this
link, an SMS receipt will be generated and sent to the visitor’s phone number. Only one SMS receipt per guest
registration can be sent in this way.
Enabling and Editing NAS Login Properties
To enable and edit the properties for automatic NAS login:
1. Go to Configuration > Guest Self-Registration. Click to expand the Guest Self-Registration row in the form, then
click its Edit link. The Customize Guest Self-Registration diagram opens.
2. In the lower-right corner of the diagram, click the NAS box or the NAS Vendor Settings link. The NAS Login form
opens.
If automatic guest login is not enabled, the submit button on the receipt page will not be displayed, and automatic
NAS login will not be performed.
Editing Login Page Properties
The login page is displayed if automatic guest login is enabled and a guest clicks the submit button from the receipt
page to log in.
To edit the properties of the login page:
1. Go to Configuration > Guest Self-Registration. Click to expand the Guest Self-Registration row in the form, then
click its Edit link. The Customize Guest Self-Registration diagram opens.
Dell Networking W-ClearPass Guest 6.2 | User Guide Configuration | 229