Deployment Guide

Creating and Editing AirPrint Settings
An AirPrint setting includes its name and description, and AirPrint printer locations that are available to the user.
To configure an AirPrint setting:
1. Go to Onboard + WorkSpace > Onboard/MDM Configuration > AirPrint, then click the Create new AirPrint
settings link in the upper-right corner. The AirPrint Settings form opens.
2. In the Name field, give this AirPrint setting a short name that identifies it clearly. AirPrint setting names can
include spaces.
If you are duplicating an AirPrint setting, the original name has "Copy" appended to it. You may highlight this
name and replace it with a new name.
3. In the Description field, you can briefly describe the characteristics of the AirPrint setting.
4. (Required) In the AirPrint Printers field, specify the Destination IP address and Resource Path of each AirPrint
location that will be available to the user.
5. Click Save Changes. The AirPrint setting is available as a configuration unit on the Configuration Profile form.
For information about the list of AirPrint settings, see "Air Print Settings" on page 144. For more information about
configuration profiles, see "Configuration Profiles" on page 208
APN Settings
APN Settings lets you manage the APN configuration settings that will be sent to a provisioned device. APN settings
are only supported on iOS devices; they are ignored by all other devices.
To create and work with APN settings, go to Onboard + WorkSpace > Onboard/MDM Configuration > APN. The
APN Settings list view opens.
Dell Networking W-ClearPass Guest 6.3 | User Guide Onboard + WorkSpace | 145