Deployment Guide

6. In the Wireless Network Settings area:
l The Security Version field lets you set the encryption version for the wireless network to WPA with TKIP or
WPA2 with AES.
l In the Auto Join row, you can mark the Automatically join network check box to specify that the device
should be automatically connected to the network when it is provisioned. If only one network is available to
the user, the device will be connected automatically. If multiple networks are available, the user will be able to
choose the network to connect to. If the Automatically join network option is not selected on this form, an
option to manually connect to the network will be shown to the user.
7. Do one of the following:
l Click Next to continue to the Protocols tab.
l Click Save Changes to make the new network configuration settings take effect.
l Click Cancel to discard your changes and return to the main Onboard configuration user interface.
For information about the list of network settings, see "Network Settings " on page 164. For more information about
configuration profiles, see "Configuration Profiles" on page 208
Configuring 802.1X Authentication Network Settings
On the Network Settings form, click the Protocols tab to display the Enterprise Protocols form.
Use this form to specify the authentication methods required by your network infrastructure.
l The iOS & OS X EAP option supports TLS, TTLS, PEAP, and EAP-FAST.
l The Legacy OS X EAP option supports only PEAP with MSCHAPv2.
Dell Networking W-ClearPass Guest 6.3 | User Guide Onboard + WorkSpace | 167