Deployment Guide

Figure 32 Sequence Diagram for Guest Self-Registration
In this diagram, the stages in the self-registration process are identified by the numbers in brackets, as follows:
The captive portal redirects unauthorized users [1] to the registration page [2]. After submitting the registration form
[3], the guest account is created and the receipt page is displayed [4] with the details of the guest account. If NAS
login is enabled (the default), submitting the form on this page will display a login message [5] and automatically
redirect the guest to the NAS login [6]. After authentication and authorization the guest’s security profile is applied by
the NAS [7], enabling the guest to access the network [8].
Creating a Self-Registration Page
The Customize Guest Registration form is divided across several pages, which are displayed separately. When you
create a new registration page, the process walks you through these pages of the form one at a time. As you complete
each page of the form, you can click Save and Continue to move to the next section of the form. At any point, you
can click Save and Continue or use your browser's Back button to move back and forth through the pages, or you can
click Save Changes to exit the process and go to the self-registration process diagram.
To create a new guest self-registration page, go to Configuration > Guest Self-Registration and click the Create
new self-registration page link. The first section of Customize Guest Registration form opens, where you can
configure basic properties and access control. The Registration Page does not exist until you create it here .
Dell Networking W-ClearPass Guest 6.3 | User Guide Configuration | 309