Users Guide

106 Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Label Description
l Authentication: The Authentication method to be used for this service.
l Connection: Originator address (Src-IP-Address, Src-Port), Destination address (Dest-IP-Address,
Dest-Port), and Protocol
l Device: Filter the service based on a specific device type, vendor, operating system location, or
controller ID.
l Date: Time-of-Day, Day-of-Week, or Date-of-Year
l Endpoint: Filter based on endpoint information, such as enabled/disabled, device, OS, location, and
more.
l Host: Filter based on host Name, OSType, FQDN, UserAgent, CheckType, UniqueID, Agent-Type, and
InstalledSHAs,
l RADIUS: Policy Manager ships with a number of vendor-specific namespace dictionaries and
distinguishes vendor-specific RADIUS namespaces with the notation RADIUS:vendor (sometimes
with an additional suffix for a particular device). To add a dictionary for a vendor-specific RADIUS
namespace, navigate to Administration > Dictionaries > Radius > Import Dictionary (link).
The notation RADIUS:IETF refers to the RADIUS attributes defined in RFC 2865 and associated RFCs.
As the name suggests, RADIUS namespace is only available when the request type is RADIUS.
l Any other supported namespace. See "Namespaces" on page 341 for an exhaustive list of
namespaces and their descriptions.
Name
(of
attribute)
Drop-down list of attributes present in the selected namespace.
Operator Drop-down list of context-appropriate (with respect to the attribute) operators. See "Operators" on page
348 for an exhaustive list of operators and their descriptions.
Value of
attribute
Depending on attribute data type, this can be a free-form (one or many lines) edit box, a drop-down list,
or a time/date widget.
Reordering Services
Policy Manager evaluates requests against the service rules of each service that is configured, in the order in which
these services are defined. The service associated with the first matching service rule is then associated with this
request. To change the order in which service rules are processed, you can change the order of services.
1. To reorder services, navigate to the Configuration > Services page. The following page displays.
Figure 50: Service Reorder Button
2. Click the Reorder button located on the lower-right portion of the page to open the Reordering Services form.