Users Guide
224 Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
SNMP Enforcement Profiles
The SNMP tab contains a VLAN identifier and timeout.
Figure 192: Fig: SNMP Enforcement Profile (SNMP Tab)
The SNMP Enforcement Profile SNMP tab loads the SNMP dictionary attributes supported by Policy Manager.
Table 118:
SNMP Enforcement Profile (SNMPtab)
Interface Description
VLAN Id VLAN ID to be sent to the device
Session Timeout Session timeout in seconds.
Reset
Connection (after
the settings are
applied)
Reset Connection is a primitive that does different actions based on the capabilities of the
network device. For devices that support the 802.1X re-authentication, Policy Manager triggers
a re-authentication; in other cases, it bounces the port.
TACACS+ Enforcement Profiles
TACACS+ Enforcement Profiles contain attribute-value pairs and other permissions related to administrative access
to a network device. The built-in TACACS+ enforcement profiles can also be used to log into the Policy Manager
UI. TACACS+ enforcement profiles use ARAP, Policy Manager:HTTP, PIX Shell, PPP:IP, PPP:IPX, PPP:LCP,
Wireless-WCS:HTTP, CiscoWLC:Common and Shell namespaces to define service attributes.