Users Guide

230 Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Figure 200: Add Enforcement Policy (Enforcement tab)
Table 125: Add Enforcement Policy (Enforcement tab)
Parameter Description
Name/Description Freeform label and description.
Type Select: RADIUS, TACACS+, WebAuth (SNMP/CLI) or Application. Based on this selection, the
Default Profile list shows the right type of enforcement profiles in the dropdown list (See
Below).
NOTE: Web-based Authentication or WebAuth (HTTPS) is the mechanism used by
authentications performed via a browser, and authentications performed via Dell OnGuard.
Both SNMP and CLI (SSH/Telnet) based Enforcement Profiles can be sent to the network
device based on the type of device and the use case.
Default Profile An Enforcement Policy applies Conditions (roles, health and time attributes) against specific
values associated with those attributes to determine the Enforcement Profile. If none of the
rules matches, Policy Manager applies the Default Profile.
Click Add new Enforcement Profile to add a new profile (This is integrated into the flow. Once
you are done creating the profile, Policy Manager brings you back to the current page/tab.)
In the Rules tab, click New Rule to display the Rules Editor:
Figure 201: Add Enforcement Policy (Rules Tab)