Users Guide

Figure 205: SNMP Read/Write Settings Tabs
Figure 206: SNMP Read/Write Settings Tabs - SNMP v3 Details
Table 129: SNMP Read/Write Settings tabs
Container Description
Allow SNMP
Read/Write
Toggle to enable/disable SNMP Read/Write.
Default VLAN
(SNMP Write
only)
VLAN port setting after SNMP-enforced session expires.
SNMP
Read/Write
Setting
SNMP settings for the device.
Community
String (SNMP
v2 only)
Force Read
(SMNP v1 and
v2 only)
Enable this setting if this is a Layer 3 device, and you intend to use the ARP table on this device as
a way to discover endpoints in the network. Static IP endpoints discovered this way are further
probed via SNMP to profile the device.
Read ARP
Table Info
Enable this setting to ensure that all CPPM nodes in the cluster read SNMP information from this
device regardless of the trap configuration on the device. This option is especially useful when
demonstrating static IP-based device profiling because this does not require any trap
configuration on the network device.
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide 235