Users Guide

Service
Parameters
Description
PostureService
Audit Thread
Pool Size
This specifies the number of threads to use for connections to audit servers.
Audit Result
Cache
Timeout
This specifies the time (in seconds) for which audit result entries are cached by Policy Manager
Audit Host
Ping Timeout
This specifies the number of seconds for which Policy Manager pings an end-host before giving
up and deeming the host to be unreachable.
WebAuthService
Max time to
determine
network
device where
client is
connected
In some usage scenarios where the web authentication request does not originate from the
network device. Policy Manager has to determine the network device to which the client is
connect through an out-of-band SNMP mechanism. The network device deduction can take some
time. This parameter specifies the maximum time to wait for Policy Manager to determine the
network device to which the client is connected.
Figure 238: System Monitor Service Parameters
Table 153: Services Parameters tab - System monitor service
Service
Parameter
Description
Free Disk
Space
Threshold
This parameter monitors the available disk space. If the available disk free space falls below the
specified threshold (default 30%), then system sends SNMP traps to the configured trap servers.
1 Min CPU
load
average
Threshold
These parameters monitor the CPU load average of the system, specifying thresholds for 1-min, 5-
min and 15-min averages, respectively. If any of these loads exceed the associated maximum value,
then system sends traps to the configured trap servers.
5 Min CPU
load
average
Threshold
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide 271