Users Guide

Table 156: Creating VLAN
Container Description
Physical
Interface
The physical port on which to create the VLAN interface. This is the interface through which the
VLAN traffic will be routed.
VLAN Name Name for the VLAN interface. This name is used to identify the VLAN in the list of network
interfaces.
VLANID 802.1Q VLAN identifier. Enter a value between 1- 4094.
The VLAN ID cannot be changed after the VLAN interface has been created.
IP Address IP address of the VLAN.
Netmask Netmask for the VLAN.
Create/Cancel Commit or dismiss changes.
Your network infrastructure must support tagged 802.1Q packets on the physical interface selected.VLAN ID 1 is
often reserved for use by certain network management components; avoid using this ID unless you know it will not
conflict with a VLAN already defined in your network.
Log Configuration
The Policy Manager Log Configuration menu at Administration > Server Manager > Log Configuration provides
the following interface for configuration:
Figure 243: Log Configuration (Services Level tab)
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide 275