Users Guide

276 Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Table 157: Log Configuration (Services Level tab)
Container Description
Select Server Specify the server for which to configure logs. All nodes in the cluster appear in the drop down list.
Select
Service
Specify the service for which to configure logs.
Module Log
Level
Settings
Enable this options to set the log level for each module individually (listed in decreasing level of
verbosity. For optimal performance you must run Policy Manager with log level set to ERROR or
FATAL):
l DEBUG
l INFO
l WARN
l ERROR
l FATAL
If this option is disabled, then all module level logs are set to the default log level.
Default Log
Level
This drop down is available if the Module Log Level Settings option is disabled. This sets the default
logging level for all modules. Available options include the following:
l DEBUG
l INFO
l WARN
l ERROR
l FATAL
Set this option first, and then override any modules as necessary.
Module
Name & Log
Level
If the Module Log Level Settings option is enabled, select log levels for each of the available
modules (listed in decreasing level of verbosity):
l DEBUG
l INFO
l WARN
l ERROR
l FATAL
Restore
Defaults/Save
Click Save to save changes or Restore Defaults to restore default settings.
Figure 244: Log Configuration (System Level tab)